|
Partial list below.
For a more detailed list, please scroll down
this page.
| No. |
NAME OF TEST |
|
1 |
Arc Resistance of Solid Insulators |
|
2 |
Capacitance Test (Devices, Cables, etc.) |
|
3 |
Characteristic Impedance Test |
|
4 |
Dielectric Breakdown (Dielectric Strength) |
|
5 |
Dielectric Constant - Insulators, Low Frequency |
|
6 |
Dielectric Constant - Insulators, X-Band |
|
7 |
Dielectric Constant - Semiconductors |
|
8 |
Dielectric Domes (Radomes) Test (Nonmechanical) |
|
9 |
Differential Thermal Analysis |
|
10 |
Distortion Temperature |
|
11 |
Electrostatic Charge Dissipation |
|
12 |
Electrostatic Charging Test |
|
13 |
Flame Retardance |
|
14 |
Flammability |
|
15 |
Flash Point |
|
16 |
Fuel Heating Value |
|
17 |
Hall Effect or Magnetoresistance |
|
18 |
Heat Capacity or Specific Heat |
|
19 |
Inductance Test (Devices, Cable, etc.) |
|
20 |
Insulation Resistance (Cables - per Pair of Conductors) |
|
21 |
Loss Factor (Loss Tangent, Power Factor) |
|
22 |
Magnetic Susceptibility or Curie Point |
|
23 |
Optical Absorption or Optical Reflection |
|
24 |
Resistivity Electrical - Surface |
|
25 |
Resistivity Electrical - Volume (Insulators) |
|
26 |
Resistivity Electrical - Volume (Metals, Semiconductors) |
|
27 |
Semiconductor Wafer Mapping (per wafer) |
|
28 |
Surface Transfer Impedance (Shielding Effectiveness) |
|
29 |
Thermal Conductivity - Liquids |
|
30 |
Thermal Conductivity - Solids |
|
31 |
Thermal Diffusivity |
|
32 |
Thermal Electromotive Force |
|
33 |
Thermal Expansion - Linear or Volume |
|
34 |
Tracking Resistance |
Testing Service List
NO. | Test | ASTM Standards | Setup, ______ hrs | Test, ______ hrs | 1 | Accreditation Assessment Service | A880,E543/807/994/1224/1323/1580/1595/1738/1905* | 4.0 | 16.0 | 2 | Alloy
Oxidation Resistance | B76/78 | 3.5 | 4.0 | 3 | Arc Resistance
of Solid Insulators | B576, D495 | 2.5 | 2.0 | 4 | Beam Diversion
of Lasers | F524 | 4.5 | 4.5 | 5 | Boiling Point | D1120 | 4.0 | 3.5 |
|
|
|
|
| 6 | Brittleness
at Low Temperatures Test | D746/2137 | 3.5 | 4.5 | 7 | Capacitance Test (Cables,
Devices, etc.) | D4566, F978/1153/1392 | 1.5 | 3.0 | 8 | Characteristic Impedance | D4566 | 2.0 | 3.0 | 9 | Coefficient
of Friction | C1028, D1894, G143 | 2.0 | 4.0 | 10 | Coercive Force | A341/596/839/848 | 3.5 | 4.5 |
|
|
|
|
| 11 | Colorimetry
or Luminance | D1729/1925/2244/4086, E167/308/429/811/1335/2073 | 3.0 | 4.5 | 12 | Comparative
Tracking Index or Tracking Resistance | D3638 | 3.0 | 3.5 | 13 | Contact
Resistance (Connectors) | B539 | 3.5 | 3.0 | 14 | Corrosion Resistance | D2059, G85 | 3.0 | 8.0 | 15 | Critical
Current - Superconductors | B714 | 6.0 | 8.0 |
|
|
|
|
| 16 | Cross-Section
Area of Stranded Conductors | B268 | 2.5 | 3.0 | 17 | Density or Specific Gravity | B311,
C329/693, D792/1122/1217/1505 | 2.0 | 3.5 | 18 | Dielectric Constant, Insulators, High Frequency | A893,
D2413/2520, F752 | 2.0 | 2.0 | 19 | Dielectric Constant, Insulators, Low Frequency | D150/669/924/1531/1711 | 1.5 | 1.5 | 20 | Dielectric
Constant, Semiconductors | D2520 | 3.0 | 3.0 |
|
|
|
|
| 21 | Dielectric
Domes/Radomes | D2520 | 3.0 | 5.0 | 22 | Dielectric Strength
(Breakdown Voltage) | D120/149/877/1389/1816/3426/3755, F1116 | 2.0 | 1.5 | 23 | Differential
Thermal Analysis | E324/472/473/537/766/794/967 | 4.0 | 8.0 | 24 | Distortion
Temperature Test | D648/3841 | 1.5 | 1.5 | 25 | Eddy Current Conductivity
Test | E1004 | 3.0 | 2.5 |
|
|
|
|
| 26 | Eddy Current Defect Test (NDT) | E215/426 | 3.0 | 4.0 | 27 | Electrical
Connector Wear Test | B794 | 3.5 | 2.5 | 28 | Electrostatic Charge Dissipation | D2624/4470/4865 | 2.5 | 2.0 | 29 | Electrostatic
Charging Test | D4470/4865 | 2.0 | 3.0 | 30 | Flame Retardance Test | D1360/1676/5025,
E84/162, F995/1002/1060 | 2.0 | 5.0 |
|
|
|
|
| 31 | Flammability Test | D1230/4151/4723, E108/119/814/1317 | 4.0 | 11.0 | 32 | Flash/Fire
Point Test | D92/93/1310/1929/3278 | 2.5 | 6.0 | 33 | Freezing Point of
Liquid Fuel | D2386 | 3.5 | 3.5 | 34 | Fuel Combustion Heat | D240/3338/3523/4809 | 4.0 | 6.0 | 35 | Glass
Transition Temperature Test | E1356 | 4.0 | 4.0 |
|
|
|
|
| 36 | Hall Effect
or Magnetoresistance | F76 | 3.5 | 5.0 | 37 | Heat Capacity or Specific Heat Test | D2766/2890/4611,
E1267/1461 | 3.5 | 4.5 | 38 | Heat of Fusion or Crystallization | E793 | 4.0 | 6.0 | 39 | Ignition
of Insulating Materials | D229/3874 | 4.0 | 6.0 | 40 | Impedance of Anodic
Coating | B457 | 3.5 | 2.5 |
|
|
|
|
| 41 | Inductance Test | A341/889 | 2.0 | 1.5 | 42 | Insulation
Electrical Resistance(Cables, Devices,etc.) | D4566/4872, E780/839 | 1.5 | 1.0 | 43 | Ground
Resistance or Grounding Test | F855/1207 | 2.5 | 1.5 | 44 | Loss Factor (Loss
Tangent, Power Factor) | D150/669/2520 | 1.0 | 1.0 | 45 | Magnetic Performance
of Materials | A341/596/698/773 | 2.5 | 3.5 |
|
|
|
|
| 46 | Magnetic
Properties of Laminated Cores @ 60 Hz | A346/697/772/804/889 | 3.0 | 3.0 | 47 | Magnetic
Susceptibility or Curie/Neel Point | A342, E1033/1312/1474 | 3.0 | 3.0 | 48 | Microhardness
Test | B578, E384 | 2.0 | 1.5 | 49 | Minority Current Carriers Diffusion Length Test | F391 | 5.0 | 4.0 | 50 | Optical
Absorption, Transmission or Reflection Test | C1549, D2702/4449 E167/168/408/810/903/972 E1084/1175/1918/1980,
F728/1252 | 3.0 | 2.0 |
| |
|
| 51 | Optical Microscope Calibration | F728 | 2.5 | 4.5 | 52 | Partial
Discharge (Corona) Pulses Detection | D1868/3382 | 2.0 | 3.0 | 53 | Photovoltaic
Module Electrical Performance Test | E1036 | 3.5 | 5.5 | 54 | Porosity
Test | C20 | 4.5 | 8.0 | 55 | Radioactivity Test (alpha, beta and/or gamma) | D3648 | 1.5 | 2.5 |
|
|
|
|
| 56 | Refraction
Index | D542(s)/1747(visc)/1218/1847(liq) | 2.5 | 2.5 | 57 | Resistivity
of Insulators - Surface | D257, F150 | 1.5 | 1.5 | 58 | Resistivity
of Insulators - Volume | D257 | 1.5 | 1.0 | 59 | Resistivity
of Liquid Insulators | D1169/4308 | 2.0 | 1.0 | 60 | Resistivity of Solvents
(Electronic Grade) | F58 | 2.0 | 1.5 |
|
|
|
|
| 61 | Resistivity of Metals and Semiconductors | B63/70/76/114/193,
D991/4496, E1004,F43/76/108/150/390
| 2.5 | 3.5 | 62 | Semiconductor Wafer Mapping | F672/1392/1393 | 3.0 | 6.5 | 63 | Sound
Transmission Test | C384, E90/336/492/596/1574, F1334 | 2.5 | 4.0 | 64 | Shielding
Effectiveness or Surface Transport Impedance | A698, D3004/4935 | 2.0 | 4.0 | 65 | Surface
Wettability (Contact Angle) Test | D724/5725 | 3.0 | 3.0 |
|
|
|
|
| 66 | Thermal
Conductivity Test - Liquids | D2717 | 2.5 | 5.0 | 67 | Thermal
Conductivity Test - Solids | C177/182/201/202/236/408/518/795/1044, | 2.0 | 4.0 |
|
|
|
|
| 68 | Thermal
Diffusivity Test | C351/714, E1461 | 2.0 | 3.0 | 69 | Thermal Electromotive
Force Test | E207, F42 | 2.0 | 2.0 | 70 | Thermal Expansion,
Linear or Volume | C372/531/539/824, D696/3386, E228/542/831/977 | 3.0 | 2.5 |
|
|
|
|
| 71 | Tracking
Resistance of Insulating Materials | D2303/3638/5288 | 3.0 | 3.0 | 72 | UV Light
Exposure Test (UV Degradation) | G151/152/153/154/155 | 3.0 | 9.0 | 73 | Viscosity
- Kinematic or Dynamic | D445/1545/4287/4486 | 3.0 | 2.5 | 74 | Weathering
Test | D4141/4364/5031/5272, E1596, G7/520 | 3.0 | 4.0 |
* A slash before the standard number means that the letter denomination
remains the same. INFORMATION PERTINENT
TO THE TEST - Purchase order for the work should be delivered with the samples/parts
to be tested. - The optimal shape of the test samples is to be discussed with the person ordering
the test. - The customer will be informed by phone/fax/email about the test results immediately
after the test completion. A comprehensive test report containing the information on the test
results, test conditions, test procedure and equipment used, equipment calibration, standard reference
materials used, statistical data on the experiment accuracy, and other pertinent information will
be mailed to the customer in two working days after the test completion. -
Samples/parts tested will be held THIRTY (30) DAYS from the test report date at which time they will be destroyed or returned to the customer who will be responsible for all shipping, handling and disposal charges. - The samples/parts will be stored upon written instructions and fee arrangements. -
Effective OCTOBER 03, 2011, the hourly charge is US$90.00.
|
